rhenogran mbts-70 omentra at brazil
Rhenogran PCZ-70/IIR - Omentra
Use Mode of action: Rhenogran PCZ-70/IIR is a curing system consisting of a curing resin and zinc oxide, pre-dispersed in butyl rubber. It is used for crosslinking butyl rubber and other elastomers, e.g. EPDM, SBR, NBR, BR, IR, and
Send Inquiry
Rubber - Raw Materials - Omentra
Rhenogran Retarder E-80 greatly retards the onset of cure without considerably extending the total curing time. It is preferably used with sulfenamide or thiazole accelerators to improve processing safety ... Rhenogran MBTS-70. SKU: ... Its applications are technical rubber components, e.g. air hoses, conveyor belts, footwear. View more.
Send Inquiry
RHENOGRAN® MBTS-70 - LANXESS
Interactive Worldmap. Find all the contact information for the LANXESS sites worldwide. find out more
Send Inquiry
Rhenogran Resorcin-80 - Omentra
Rhenogran Resorcin-80 is one component of the bonding system resorcinol/ formaldehyde/silica. In combination with a formaldehyde donor (e.g. Rhenogran Hexa-80 or Cohedur A 250) the resorcinol formaldehyde resin, responsible for the bonding of rubber to textile and steelcords, is formed during the curing process.
Send Inquiry
Rhenodiv MR-30/1 - Omentra
Use Mode of action: Rhenodiv MR-30/1 is silicone-free. It prevents the rubber vulcanizates from sticking to the molds and, hence, facilitates the release from the molds. Rhenodiv MR-30/1 renders possible subsequent lacquering, weldi
Send Inquiry
10251 Rubber Productcatalog EN A4
standard accelerators, Rhenogran® TP-50 sets standards in achiev ing cost-efficiency in EPDM extrusion while keeping reject rates low. In particular, the considerably high solubility (up to 6 phr) provides high flexibility in a wide range of formulations. Rhenogran® CLD-80 is a real multitalent: Invented by Rhein Chemie it is a sulfur donor.
Send Inquiry
Aflux 37 - Omentra
Aflux 37 enhances the processing of silica-based rubber compounds by improving silica dispersion and decreasing compound viscosity. By application of Aflux 37 higher extrusion rates are obtained. Owing to its selected polarity Aflux 37 acts as a surface active substance for white fillers.
Send Inquiry
Rhenodiv MR-60 - Omentra
Rhenodiv MR-60 is a semi-permanent release agent and does not have to be applied at every cycle. The number of demoldings that can be achieved with one coating depends on the particular conditions of molding and demolding. It has to be tested for every application separately. Dosage: Rhenodiv MR-60 is miscible with water at any ratio.
Send Inquiry
Rolls and printing blankets | Rhein Chemie
Rolls and printing blankets Rolls are made from virtually all elastomer grades. Mostly, the optimization of abrasion and media resistance adversely affects the dynamic and adhesive properties of the elastomer material.
Send InquiryAntilux 111 - Omentra
Use Mode of action: Antilux 111, with its reduced solubility migrates to the surface of the vulcanizates where it forms a complete protective film which remeins stable at temperatures up to about 50 °C. The formation of the film
Send Inquiry
Rhenogran PCZ-70/IIR - Omentra
Use Mode of action: Rhenogran PCZ-70/IIR is a curing system consisting of a curing resin and zinc oxide, pre-dispersed in butyl rubber. It is used for crosslinking butyl rubber and other elastomers, e.g. EPDM, SBR, NBR, BR, IR, and
Send Inquiry
Rubber - Raw Materials - Omentra
Rhenogran Retarder E-80 greatly retards the onset of cure without considerably extending the total curing time. It is preferably used with sulfenamide or thiazole accelerators to improve processing safety Rhenogran MBTS-70. SKU: Its applications are technical rubber components, e.g. air hoses, conveyor belts, footwear. View more.
Send Inquiry
RHENOGRAN® MBTS-70 - LANXESS
Interactive Worldmap. Find all the contact information for the LANXESS sites worldwide. find out more
Send Inquiry
Rhenogran | Rhein Chemie
Product group. Rubber Additives. Product group; Product name. Rubber Additives . Accelerators
Send Inquiry
Rhenodiv MR-30/1 - Omentra
Use Mode of action: Rhenodiv MR-30/1 is silicone-free. It prevents the rubber vulcanizates from sticking to the molds and, hence, facilitates the release from the molds. Rhenodiv MR-30/1 renders possible subsequent lacquering, weldi
Send Inquiry
Rhenogran Resorcin-80 - Omentra
Rhenogran Resorcin-80 is one component of the bonding system resorcinol/ formaldehyde/silica. In combination with a formaldehyde donor (e.g. Rhenogran Hexa-80 or Cohedur A 250) the resorcinol formaldehyde resin, responsible for the bonding of rubber to textile and steelcords, is formed during the curing process.
Send InquiryRhenodiv MR-60 - Omentra
Rhenodiv MR-60 is a semi-permanent release agent and does not have to be applied at every cycle. The number of demoldings that can be achieved with one coating depends on the particular conditions of molding and demolding. It has to be tested for every application separately. Dosage: Rhenodiv MR-60 is miscible with water at any ratio.
Send Inquiry
Aflux 37 - Omentra
Aflux 37 enhances the processing of silica-based rubber compounds by improving silica dispersion and decreasing compound viscosity. By application of Aflux 37 higher extrusion rates are obtained. Owing to its selected polarity Aflux 37 acts as a surface active substance for white fillers.
Send Inquiry