araldite ly 1564 sp/aradur 917/accelerator 960-1 in philippines

araldite ly 1564 sp / aradur 917 / accelerator 960-1

Araldite LY 1564 SP / Aradur 917 / Accelerator 960-1

Araldite® LY 1564 SP with Aradur® 917 and Accelerator 960-1 exhibits a low-mix viscosity at room temperature in combination with a long pot life. However, very short cure cycles can be achieved at cure temperatures above 248 °F for an economical production. The system shows good fiber impregnation properties and is easy to process.

Send Inquiry
araldite ly 1564 sp / aradur 917 / accelerator 960-1

Araldite LY 1564 SP / Aradur 917 / Accelerator 960-1

CASE covers coatings, adhesives, sealants, elastomers, inks, building and construction products. Our products perform a multitude of tasks: creating the perfect finish or texture, vital protection, adhesion or longevity.

Send Inquiry
selector guide - huntsman corporation

Selector Guide - Huntsman Corporation

Araldite® LY 1564 SP / Aradur® 3485 • • •• • 970 - 1,050 40 - 55 100/37 200 - 320 7 days at 73ºF or 5 hrs at 212ºF up to 194 17.4 - 19.6 9.0 - 10.5 989 - 1,077 1.14 - 1.48 Low-viscosity, toughened, amine epoxy system with long pot life. Designed for the production of large parts.

Send Inquiry
araldite ly 1564 aradur 917 accelerator 960-1

Araldite LY 1564 Aradur 917 Accelerator 960-1

Home / Composites & Tooling / Epoxy / Composite resin systems for wet lay-up etc. / Araldite LY 1564 : Aradur 917 : Accelerator 960-1 Araldite LY 1564 : Aradur 917 : Accelerator 960-1 £ 0.00

Send Inquiry
selector guide - maxepoxi

Selector Guide - Maxepoxi

Araldite® Y 1564 SP / Aradur® 3485 •••• •. Formulated amine system. Low viscosity and high flge parts. Araldite® Y 1564 SP / Aradur® 3486 •••• Low viscosity and high floduction of ge parts. Araldite® Y 1568 / Aradur® 3489 •••• • dener can be blended with Aradur® 3491 or Aradur® 3492 to . Araldite® Y 1568 / Aradur® 3491 •••• •. High elongation.

Send Inquiry
cold to hot curing matrix systems (wet lay-up, rtm)

Cold to hot curing matrix systems (Wet lay-up, RTM)

10 min @ 80 + 20 min @ 100 ® Hardener XB 3458 7.0-9.5 14-18 2-4 10 min @ 80 + 20 min @ 100 110-125 120-130 Resin XB 3585 / 110-125 120-130-(%) ® ® ® ® ® ® ® Resin XB 3585 / ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® (%))** ® ® ® ® ® ® ® ® ® ®

Send Inquiry
general industry

GENERAL INDUSTRY

Advanced Materials dedicated to the General Industry • Additional products and systems are available on request. ... Araldite ® LY 1564 SP / Aradur ® 3487. Pot life > 200 minutes. Resin XU 3508 / Aradur ® 3486. Resin XB 3585 / ... Araldite ® LY 564 / Aradur ® 917 / Accelerator 960-1. Resin XU 3508 / Aradur ® 917 / Accelerator DY 070 ...

Send Inquiry
araldite ly 1564 /aradur 2954

Araldite LY 1564 /Aradur 2954

Araldite LY 1564 SP is an epoxy resin that is used with Aradur 2954,a cycloaliphatic polyamine, to form a heat curing epoxy system. This system is ideal for the creation of industrial and structural composites.

Send Inquiry
lamináló gyanták (mátrix)

Lamináló gyanták (mátrix)

Lamináló gyanták (mátrix) általános felhasználásra FARIX KFT 1119 Budapest, Tétényi út 79. Tel.: 06-1-4647-570 Fax: 06-1-4647-577 e-mail: epoxi@farix.hu

Send Inquiry
us composites selector guide 2013 - slideshare

US Composites Selector Guide 2013 - SlideShare

GL approved.Araldite® LY 1564 SP / Aradur® 3485 • • •• • 970 - 1,050 40 - 55 100/37 200 - 320 7 days at 73ºF or 5 hrs at 212ºF up to 194 17.4 - 19.6 9.0 - 10.5 989 - 1,077 1.14 - 1.48 Low-viscosity, toughened, amine epoxy system with long pot life.

Send Inquiry
araldite ly 1564 sp / aradur 917 / accelerator pdf

Araldite LY 1564 SP / Aradur 917 / Accelerator PDF

2 PROCESSING DATA MIX RATIO Components Araldite LY 1564 SP Aradur 917 Accelerator Parts by weight Parts by volume PROCESSING RECOMMENDATIONS The hardener and accelerator can be premixed to allow the use of two-component mixing/dosing equipment.

Send Inquiry
araldite ly 1135-1/aradur 917-1/accelerator 960-1

Araldite ly 1135-1/aradur 917-1/accelerator 960-1

Araldite LY 1564/Aradur 917-1/Accelerator 960-1 is a low viscosity, epoxy curing system for manufacturing high performance composite parts. This three part system includes: Araldite LY 1564 an epoxy resin, Aradur 917-1 an anhydrous base hardener and Accelerator

Send Inquiry
advanced materials | araldite® ly 1564 sp

Advanced Materials | Araldite® LY 1564 SP

Araldite® LY 1564 SP with Aradur® 917 and Accelerator 960-1 exhibits a low-mix viscosity at room temperature in combination with a long pot life. However, very short cure cycles can be achieved at cure temperatures above 248 °F for an economical production.

Send Inquiry
Композитные системы - руководство по выбору «Корсил Трейд»

Композитные системы - руководство по выбору «Корсил Трейд»

Возможно смешивание отвердителей Aradur® 3486 и Aradur® 3487 для регулирования реактивности при постоянном соотношенииПодходит для изготовления оснастки. Свободное постотверждение после пред отверждения при 23°С. Araldite® LY 1564 / Aradur* 917

Send Inquiry
advanced materials | araldite® ly 1564

Advanced Materials | Araldite® LY 1564

Araldite® LY 1564 with Aradur® 917 and Accelerator 960-1 exhibits a low mix viscosity at room temperature in combination with a long pot life. Nevertheless very short cure cycles can be achieved at cure temperatures above 120 °C for an economical production. The system shows good fibre

Send Inquiry
araldite ly 1564 / aradur 917-1 / accelerator 960-1

Araldite LY 1564 / Aradur 917-1 / Accelerator 960-1

Araldite® LY 1564 / Aradur® 917-1 / Accelerator 960-1. REACH compliant anhydride based system. Very long latency combined with low reaction exotherm.

Send Inquiry
selector guide - huntsman library/aaraldite ly 1564 sp / aradur

Selector Guide - Huntsman Library/aAraldite LY 1564 SP / Aradur

Hardener may be used in conjunction with Aradur 3491 or Aradur 3492 to adjust the system reactivity.248F 252 - 266 20.3 - 21.7 6.0 - 7.0 648 - 769 0.57 - 0.71 Anhydride-cured, epoxy system with an extended working time designed for industrial composite applications.Araldite LY 1564 SP

Send Inquiry
aligned carbon nanotube–epoxy composites: the effect

Aligned carbon nanotube–epoxy composites: the effect

Composites were made using a hot curing epoxy matrix based on bisphenol A epoxy resin (Araldite LY 1564), anhydride hardener (Aradur 917), and amine accelerator (960-1). The epoxy system is recommended for industrial filament winding, pultrusion, wet lay-up, or Resin Transfer Moulding

Send Inquiry
formulated resin system - huntsman araldite® ly 1564

Formulated Resin System - HUNTSMAN Araldite® LY 1564

HUNTSMAN ARALDITE® Araldite® LY 1564. Contact. Datasheet.Hardener Reference: Aradur® 917.Accelerator 960-1.

Send Inquiry
araldite ly556_aradur 917_accelarator dy 070_tds | epoxy

Araldite LY556_Aradur 917_Accelarator DY 070_TDS | Epoxy

LY 556, Aradur. 917 and Accelerator DY 070 are stored in a. dry place in their original, properly closed containers at the above mentioned storage temperatures they will have the shelf livesDocuments Similar To Araldite LY556_Aradur 917_Accelarator DY 070_TDS. Carousel Previous Carousel Next.

Send Inquiry